The best performance in cracked concrete for maximum tensile loads.

Highbond anchor FHB II-A L

The fischer Highbond anchor FHB II-A L is a system component of the fischer Highbond-System FHB II. The force-controlled expanding composite anchor is ideal for fixing maximum loads in cracked and non-cracked concrete. Façade sub-structures, silo installations and heavy steel constructions, for example, can be fixed with the FHB II. The conical threaded rod can be used with approval either with the injection mortar FIS HB FIS HB or the resin capsules FHB II-P and FHB II-PF HIGH SPEED. The large anchorage depth of the threaded rod allows maximum load values. This means that fewer fixing points and smaller anchor plates are required.

Produktne variante

Download of image data

Produktne variante

Godkendelser / Testrapporter

63 Produktvariant(er)

Drill diameter

Drill hole depth

Anchorage depth

Max. fixture thickness

Thread

Width across nut

Legende = Tilladelse tilgængelig— = Tilladelse ikke tilgængelig

Flere resultater

Set 18 af 63 variant(er)

Advantages

The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.

Functionality

The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
The styrene-free vinyl ester mortar fully seals the drill hole.
When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.

Mounting Strip 1 Picture

1 / 9

Mounting Strip 2 Picture

1 / 5

ETA Certification Document

pdf, ETA-05/0164

European Technical Assessment for fischer Highbond-Anchor FHB II - Torque controlled bonded anchor for use in concrete

Ustvarjeno na 14. 12. 2017

DOP - Declaration of Performance

pdf, DoP No. 0282

Declaration of Performance for fischer Highbond-Anchor FHB II (Bonded fastener for use in concrete)

Ustvarjeno na 19. 01. 2021

Test report (fire protection)

pdf, GS 3.2/16-352-1

fischer Highbond anchors FHB II and FHB 11 lnject

Velja od 07. 02. 2017
do 06. 02. 2027

Test report (fire protection)

pdf, (2103/12/12) - CM

lnjection systems FHB / FHB dyn / FDA

Velja od 15. 07. 2021
do 15. 07. 2026

Filling Quantities

pdf,

Filling quantities für highbond-Anchor FHB II-A L

Load Table

pdf,

Highbond-Anchor FHB II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Installation Instructions

pdf,

fischer FHB II

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M8
Width across nut	13 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209970324

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	30 mm
Thread ( M )	M8
Width across nut	13 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209970331

ETA-approval
Drill diameter ( d₀ )	10 mm
Drill hole depth ( h₀ )	75 mm
Anchorage depth ( h_ef )	60 mm
Max. fixture thickness ( t _fix )	50 mm
Thread ( M )	M8
Width across nut	13 mm
Scale parts mortar	3
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209970348

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	110 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	5
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209969076

ETA-approval
Drill diameter ( d₀ )	12 mm
Drill hole depth ( h₀ )	110 mm
Anchorage depth ( h_ef )	95 mm
Max. fixture thickness ( t _fix )	100 mm
Thread ( M )	M10
Width across nut	17 mm
Scale parts mortar	5
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4006209969427

Highbond anchor FHB II-A L

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos

ETA-approval
Drill diameter ( d₀ )	14 mm
Drill hole depth ( h₀ )	115 mm
Anchorage depth ( h_ef )	100 mm
Max. fixture thickness ( t _fix )	10 mm
Thread ( M )	M12
Width across nut	19 mm
Scale parts mortar	7
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4048962078053

ETA-approval
Drill diameter ( d₀ )	18 mm
Drill hole depth ( h₀ )	140 mm
Anchorage depth ( h_ef )	125 mm
Max. fixture thickness ( t _fix )	100 mm
Thread ( M )	M16
Width across nut	24 mm
Scale parts mortar	11
Packaging	Folding box
Amount	10 pcs
GTIN (EAN-Code)	4048962078176