Art.-No. 534474

fischer express cement DEC cement grey 310 ml

Top Features

Saves time as pre-mixing is not necessary.
Processing in any weather. The mortar also bonds on moist base materials.
Discreet joints.
Suitable for internal and external use.
Practically odour-free.

The repairing mortar that is paintable and ready to use.

Advantages

The ready-to-use, sprayable joint mortar means that there is no need to add water or carry out time-consuming pre-mixing work. It enables clean, purposeful work. This means that you avoid dirtying surrounding areas and wasting material.
Good adhesion even on slightly damp substrates practically allows for all-weather work and prevents forced interruptions.
The structure of the high-quality water-based polymer has been perfectly designed with the visual appearance of the mortar in mind. This ensures a discreet joint and perfect appearance.

fischer Express Cement Premium DEC, the ready-to-use, paintable repairing mortar that has a variety of uses. These include renovating masonry, fixing roof tiles, sealing drill holes or general repair work. The practically odour-free mortar can be easily used due to its stable consistency. It provides very good resistance to weather, ageing and UV. The single-component polymer dispersion can be processed at temperatures between +5 °C and +40 °C, and is temperature-resistant between -30 °C and +75 °C. fischer Express Cement Premium DEC can also be reused. When in the cartridge, it is protected against frost at temperatures down to -15 °C.

Applications

Repairing masonry joints
Closing masonry cracks
Repairing chipped edges
Closing drill holes in facing masonry during repair work
General repair work (e.g. drill holes with cracked edges)
For a better reusability, to close opened cartridges with adhesive tape

Building materials

Concrete
Pumice
Fibre cement
Gypsum
Wooden materials
Sand-lime brick
Ceramics
Clinker brick
Masonry
Aerated concrete
Plaster
Cement
Brick

Podroben opis najdete v priloženem dokumentu

Functionality

Chemical base: 1C polymer dispersion
Plastic
Consistency: Firm
Practically odour-free
Skin formation time: Approx. 10 minutes.
Processing temperature: +5 °C to +40 °C (not below +5 °C)
Temperature resistance up to -30 °C (fully cured)
Weather-proof after approx. 24 hours.
Very good resistance to UV, weather and ageing
Paintable
Frost-protected in the cartridge
Free of silicone, MDI and solvents
Not recommended for caulking guns with a transmission ratio of less than 10:1 (e.g. KPM1)

Contents	310 ml
Languages on the cartridge	DE, EN
Packaging	Cartridge
Amount	1 pcs.
GTIN (EAN-Code)	4048962233308

fischer express cement DEC cement grey 310 ml

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Tehnični podatki