The undercut anchor for thin ceramic façade panels.

Zykon panel anchors FZP II T D40 PA

The undercut anchor for a concealed fixing of thin façade panels out of ceramics or fine stoneware. Use in conjunction with clasp systems or with other attachments.

Produktne variante

Download of image data

Produktne variante

Aprobaty / raporty z badań

5 Warianty produktu

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

Legenda = Dostępna aprobata— = Aprobata niedostępna

Przeglądano 5 wariantów 5

Advantages

The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.

Functionality

Wet diamond drilling in ceramic.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
Drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
Stress-free and geometrical inter-locking fixing.

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-23/0756

European Technical Assessment for fischer-Zykon panel anchor FZP II T

Ustvarjeno na 08. 12. 2023

DOP - Declaration of Performance

pdf, DoP No. 0359

Declaration of Performance for fischer-Zykon-panel anchor FZP II T

Ustvarjeno na 12. 04. 2024

ETA Certification Document

pdf, ETA-23/0035

European Technical Assessment for fischer ZYKON FZP II T D40 PA for fixing Atlas Concorde facade panels - Fastener of external wall claddings. Special anchor for the rear fixing of Atlas Concorde ceramic tile facade panels

Ustvarjeno na 24. 01. 2023

DOP - Declaration of Performance

pdf, DoP No. 0364

Declaration of Performance for fischer ZYKON FZP II T D40 PA panel anchor (for Atlas Concorde ceramic tile facade panels)

Ustvarjeno na 03. 06. 2024

ETA Certification Document

pdf, ETA-22/0400

European Technical Assessment for fischer ZYKON FZP II for fixing Mirage facade panels

Ustvarjeno na 25. 08. 2022

DOP - Declaration of Performance

pdf, DoP No. 0322

Declaration of Performance for fischer Zykon-panel anchor FZP II (for Mirage)

Ustvarjeno na 12. 10. 2022

ETA-approval
Min. panel thickness	8 mm
Embedment depth ( h₁ )	5 mm
Total length ( l )	17,5 mm
Installed anchor length ( a )	7,5 mm
Remaining thread length ( b )	10 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	orange
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962362077

ETA-approval
Min. panel thickness	8 mm
Embedment depth ( h₁ )	5 mm
Total length ( l )	20,5 mm
Installed anchor length ( a )	7,5 mm
Remaining thread length ( b )	13 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	orange
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962362084

ETA-approval
Min. panel thickness	8 mm
Embedment depth ( h₁ )	6 mm
Total length ( l )	17,5 mm
Installed anchor length ( a )	8,5 mm
Remaining thread length ( b )	9 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	red
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962217735

ETA-approval
Min. panel thickness	10 mm
Embedment depth ( h₁ )	8 mm
Total length ( l )	20,5 mm
Installed anchor length ( a )	10,5 mm
Remaining thread length ( b )	10 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	yellow
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962217742

ETA-approval
Min. panel thickness	11 mm
Embedment depth ( h₁ )	9 mm
Total length ( l )	20,5 mm
Installed anchor length ( a )	11,5 mm
Remaining thread length ( b )	9 mm
Thread ( M )	M6
Cylindrical diameter ( d₀ )	11 mm
Undercutdiameter ( d₁ )	13,5 mm
Colour washer	blue
Seismic-Approval	C1 / C2
System	—
Amount	250 pcs
GTIN (EAN-Code)	4048962217759

Zykon panel anchors FZP II T D40 PA

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos