Zykon-Panel anchor

For concealed fixing of facade panels


Zykon-Panel anchor FZP II A4

Zykon-Panel anchor FZP II A4

The universal undercut anchor made of A4 stainless steel for natural stone.
Zykon-Panel anchor FZP II Carbon

Zykon-Panel anchor FZP II Carbon

The universal carbon fibre-reinforced undercut anchor for natural stone.
Zykon-Panel anchor FZP II SO AL

Zykon-Panel anchor FZP II SO AL

The adjusting undercut anchor made of A4 stainless steel for natural stone.
Zykon-Panel anchor FZP II SO Carbon

Zykon-Panel anchor FZP II SO Carbon

The adjusting carbon fibre-reinforced undercut anchor for natural stone.
Zykon-Panel anchor FZP II VS

Zykon-Panel anchor FZP II VS

The suspension anchor with the fischer Vertical Solution for natural stone façade panels.
Zykon-Panel anchor FZP II SH

Zykon-Panel anchor FZP II SH

The undercut anchor for soft stone façade panels.
Zykon-Panel anchor FZP II M8i

Zykon-Panel anchor FZP II M8i

The undercut anchor with an internal thread for M8 threaded screws in natural stone façade panels.
Zykon-Panel anchor FZP II M6i

Zykon-Panel anchor FZP II M6i

The undercut anchor with an internal thread for M6 threaded screws in natural stone façade panels.
Zykon-Panel anchor FZP II T Tergo+

Zykon-Panel anchor FZP II T Tergo+

The specialist for thin fibre cement façade panels by Equitone.
Zykon-Panel anchor FZP II T PA

Zykon-Panel anchor FZP II T PA

The specialist for thin façade panels, such as HPL and fibre cement.
Zykon-Panel anchor FZP II T D40

Zykon-Panel anchor FZP II T D40

The specialist for thin ceramic façade panels.
Zykon-Glas point fixing FZP G Z ESG

Zykon-Glas point fixing FZP G Z ESG

The glass point holder for aesthetic fixing of single layered glass façade panels.
Zykon-Glas point fixing FZP G Z VSG

Zykon-Glas point fixing FZP G Z VSG

The glass point holder for aesthetic fixing of laminated composite safety glass.

Zykon-Panel anchor

For concealed fixing of facade panels

The fischer Zykon panel anchor FZP provides a positive-locking and therefore completely stress-free fixing in an undercut drill hole. By placing the undercut anchor at the back side of the plate, the fixing solution is concealed. This technology provides multiple higher loads compared to conventional fixing solutions. It allows lower panel thicknesses and larger panel sizes due to smaller panel bending moments and offers the right type of anchor for different facade materials and applications.

sc93-delivery-2