Design for thin ceramic or porcelain stoneware panels.
The big washer alwasy enables a flush installation - also with a pattern on the backside of the panel.
Stress-free fixing enables high loads and use of thin panels.
The distance washers ensures a controlled, stress-free rotation of attachment parts.
Acessórios
Art.-Nr. 802333
HVL 11
Art.-Nr. 802506
STU 10-30
Art.-Nr. 530910
FZPB 9T
Art.-Nr. 802522
SGB/230V
Art.-Nr. 804063
CNC-adaptor
Art.-Nr. 802339
DPL 11
Art.-Nr. 802669
SGT
Art.-Nr. 535984
FZPB 11/21 CNC
Art.-Nr. 061500
SBN 502
Art.-Nr. 802507
MST-D
Art.-Nr. 803749
SGA-M6
As vantagens / Descrição do produto
The specialist for thin ceramic façade panels.
Advantages
The short geometry of the anchor allows it to be used in thin panels starting from 8 mm thickness.
The fixing is not externally visible, creating a visually appealing façade surface.
The matching shape of the undercut anchor creates a inter-locking and stress-free fixing in the conical undercuted drill hole.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.
This anchor provides much better holding forces than commonly available systems which allows for the use of large format panels.
The concealed fixing solution for thin ceramic and fine stoneware façade panels. Use in conjunction with clasps systems on façades or with other attachments.
Aplicação e aprovação
Applications
For high aesthetical requrements:
The concealed fixing of thin façade panels on exterior and interior façade as well as reveal panels.
Building materials
Ceramics
Fine stoneware (>10mm)
Poderá encontrar informações, em pormenor, sobre os materiais de construção nos documentos técnicos.
Aprovações
ETA-23/0756
ETA-22/0400
DoP No. 0359
DoP No. 0364
DoP No. 0322
Instruções de montagem
Functionality
Wet diamond drilling in ceramic.
The drill hole is drilled with an absolute anchoring depth.
Flush installation of the anchor, the spacer washer will be in full contact with the surface of the material.
drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole.
Expanding the undercut anchor by "pressing down" the washer using the setting tools.
