The undercut anchor for soft natural stone façade panels.

Zykon panel anchors FZP SH R

The undercut anchor for a concealed stand-off installation solution for heavy façade panels of selected soft natural stone (stone group IV - sedimentary rock). This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This can be used to compensate panel thickness tolerances. A completely flat façade surface is created.

Produktne variante

Download of image data

Produktne variante

2 termékváltozat

Min. panel thickness

Embedment depth

Total length

Installed anchor length

Remaining thread length

Thread

A (z) 2 változatok 2 megtekintése

Advantages

Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The flush-mounted anchor allows for easy, economical construction of reveals.
Depending on the application, the user can choose between flush installation with an absolute anchoring depth, for instance for reveal panels, and stand-off installation technology with a constant remaining wall thickness that serves as a reference dimension to compensate panel thickness tolerances.
The matching shape of the undercut anchor creates an inter-locking and stress-free fixing in the conical undercuted drill hole.
The fixing is not externally visible, creating a visually appealing façade surface.
Setting the anchor using undercut technology allows the user to select the best structural position in the façade panel. This significantly reduces the bending moment of the panel.
The anchor allows higher failure loads compared to common systems.

Functionality

The hole is either drilled to a constant reference dimension for the remaining wall thickness (RWT) or with an absolute anchoring depth.
The anchor can be installed flush or stand-off.
The compensation of panel thickness tolerances results in a completely flat façade surface.
Wet diamond drilling: first cylindrical, then conical - to create the undercut.
Inserting the undercut anchor in the cylindrical-conical undercut hole
Expanding the undercut anchor by "pressing down" the washer using the setting tools
Stress-free and geometrical inter-locking fixing

Mounting Strip 1 Picture

1 / 4

1
2
3
4

Mounting Strip 2 Picture

1 / 6

1
2
3
4
5
6

Min. panel thickness	50 mm
Embedment depth ( h₁ )	30 mm
Total length ( l )	49 mm
Installed anchor length ( a )	30 mm
Remaining thread length ( b )	19 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	17,3 mm
System	—
Amount	50 pcs
GTIN (EAN-Code)	4048962171501

Min. panel thickness	50 mm
Embedment depth ( h₁ )	30 - 36 mm
Total length ( l )	64 mm
Installed anchor length ( a )	41 mm
Remaining thread length ( b )	23 mm
Thread ( M )	M8
Cylindrical diameter ( d₀ )	13 mm
Undercutdiameter ( d₁ )	17,3 mm
System	—
Amount	50 pcs
GTIN (EAN-Code)	4048962171518

Zykon panel anchors FZP SH R

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe