Hammer nut with clip for quick insertion into the rail
Integrated spring to facilitate PV panel positioning
Clamp and nut in AW 6060 T66 aluminium, screw in A2-70 stainless steel, clip in PA 6
Dovoljenja
569371 čl.-št.
SolarFish H44 3.65 m AL
Opis izdelka
The pre-assembled central clamp for PV modules with aluminium frame
Advantages
Thanks to the spring, the pre-assembled PM C clamp remains raised during the tightening phases and thanks to the plastic element it stays in position without sliding in the rail.
The clamps do not require any additional elements like screws, gaskets or bolts.
PM C is the pre-assembled clamp for PV panels with an aluminium frame. The PM C clamp is available in different variants depending on the thickness of the PV panel. The clamp features a hammer nut with a special plastic cage to facilitate positioning of the nut inside the central groove of the rail. The spring keeps the clamp raised until it is tightened to facilitate positioning of the PV panel.
Properties
PM C clamp in AW 6060 T66 aluminium alloy in accordance with EN 755-2:2013.
A2.70 stainless steel Allen screw in accordance with EN ISO 3506-1 /2:2009.
FCN AL Hammer head nut in AW 6060 T66 aluminium alloy in accordance with EN 755-2:2013 and grey nylon PA6.
Dovoljenje aplikaciji
Applications
Suitable for:
Pitched roof systems with hooks
Flat roof systems with triangular frames
Trapezoidal metal sheet roof systems
Corrugated sheets roof systems
Special structures systems
With:
SolarFish H33
SolarFish H44
SolarMetal
Navodila uporabe
Functionality
Insert the lower part of the PM pre-assembled clamps into the upper groove of the rail.
Turn the PM pre-assembled clamps 90° clockwise.
Lock the PV module by applying a tightening torque of about 10 Nm to the Allen screw (TCEI).
