Stainless steel hook with large base RH HB A2

Produktne variante

(0) produktnih variant (s)

Thickness

Under tile height

Total height

Depth

Width across nut

Installation torque

Weight

Contents

Amount

GTIN (EAN-Code)

Thickness( S )	5 mm
Under tile height( h₁ )	40 - 54
Total height( H )	110 - 143 mm
Depth( D )	85 mm
Width across nut	13 mm
Installation torque( T_inst )	20 / 10 Nm
Weight	0,83 kg
Contents	10 x Hook RH HB A2 10 x Hexagon head screw SKS M8 x 20 A2 10 x Hexagon nut MU F M8 A2
Amount	10 pcs
GTIN (EAN-Code)	8001132715260

Poglej (0) od (1) rezultat (s)

Advantages

The roof hook offers several adjustment elements: the lower vertical adjustment allows the hook to be adapted to different thicknesses of tiles and ventilation layers. The vertical adjustment element at the top allows adjustment of the distance between the profile and the top of the brick. The upper adjustment option allows the profile to be aligned parallel to the eaves / ridge.
The 5 mm thickness allows a reduced tile grinding.
Made of resistant stainless steel.
The accessories for connecting to the Solar rails are included in the package.

Properties

Functionality

Determine the centre distance of the hooks according to the snow and wind loads in the installation area (use SOLARPANEL-FiX software to design the system) and according to the load-bearing structure and system layout.
Lift the tile and secure the base of the hook using the appropriate anchor determined according to the type and layers of the load-bearing support.
Make the height and width adjustments required by the type of roofing and tighten the screws of the adjustments applying a 20 Nm torque to lock the hook in position.
Grind the upper tile to fit the hook shape and put it back in position.
Use the existing slot in the higher part of the hook to adjust the selected rail position.
Fasten the rail tightening the screw with a 10 Nm torque.

Mounting Strip 1 Picture

1 / 6