HybridPower. Plastic meets steel. Strong, safe & simple.

HybridPower

The fischer HybridPower is the first anchor on the market to combine the advantages of a classic plastic plug with the security of a steel anchor. Thanks to the combination of the two materials, the HybridPower is set like a classic plug and can be used in all building materials. At the same time, it offers high load-bearing capacities and secure anchoring, even in the event of fire. The range is suitable for metal and timber attachments up to 10 mm. The plug can be used for pre-positioned and push-through installation.

Produktne variante

Download of image data

Produktne variante

(0) produktnih variant (s)

Drill diameter

Anchor length

Min. drill hole depth for through fixings

Screw dimension

Min. drill hole depth

Min. effect. anchorage depth

Poglej (0) od (1) rezultat (s)

Advantages

The HybridPower can be installed quickly and easily, just like a conventional plastic plug. It can be inserted by hand and no special tools or torque wrench are required.
Thanks to the metal component, the plug also holds heavy loads and offers a high load-bearing capacity and additional safety.
The HybridPower is universally applicable and can be used in solid and hollow building materials. The flexible plastic expands in any building material.
The metal component also withstands fire and offers certified safety in case of fire.
The universal plug head enables the use of the plug for pre-positioned and push-through installation and thus offers maximum flexibility in application.
The included screw provides a clean and straight finish at the fixing point.
The fixing point can be released at any time by simply removing the screw.

Applications

TV mountings
Pull-up bars
Shelves
Kitchen hanging cabinets
Wardrobes
Lighting
Metal brackets
Metal supports
Air conditioners
Plumbing and heating fixings

Building materials

Concrete
Solid sand-lime brick
Solid brick
Solid block made from lightweight and normal weight concrete
Vertically perforated brick
Perforated sand-lime brick
Hollow blocks made from lightweight concrete
Aerated concrete

Podroben opis najdete v priloženem dokumentu

Dovoljenja

25-005-2(0)

Functionality

The HybridPower is suitable for pre-positioned and push-through installation.
The plug is pushed directly into the drill hole by hand or with a few light hammer blows and then expands by screwing the screw into the building material.
The metal power wedges interlock with the building material for high load-bearing capacities.
Countersunk head screws are recommended for timber constructions.
Hexagon head screws are recommended for metal constructions.

Mounting Strip 1 Picture

1 / 6

Mounting Strip 2 Picture

1 / 6

Mounting Strip 3 Picture

1 / 6

Mounting Strip 4 Picture

1 / 6

Drill diameter ( d₀ )	10 mm
Anchor length ( l )	90 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	7.0x89 mm
Min. drill hole depth ( h₁ )	90 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Max. fixture thickness ( t _fix )	10 mm
Drive	TX40 / SW 13
Width across nut	13 mm
Amount	4 pcs
Packaging	Blister card
GTIN (EAN-Code)	4048962568837

Drill diameter ( d₀ )	10 mm
Anchor length ( l )	90 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	7.0x89 mm
Min. drill hole depth ( h₁ )	90 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Max. fixture thickness ( t _fix )	10 mm
Drive	TX40 / SW 13
Width across nut	13 mm
Amount	10 pcs
Packaging	Folding box
GTIN (EAN-Code)	4048962565072

Drill diameter ( d₀ )	10 mm
Anchor length ( l )	90 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	7.0x89 mm
Min. drill hole depth ( h₁ )	90 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Max. fixture thickness ( t _fix )	10 mm
Drive	TX40 / SW 13
Width across nut	13 mm
Amount	50 pcs
Packaging	Folding box
GTIN (EAN-Code)	4048962559446

Drill diameter ( d₀ )	10 mm
Anchor length ( l )	90 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	7.0x87 mm
Min. drill hole depth ( h₁ )	90 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Max. fixture thickness ( t _fix )	10 mm
Drive	TX40
Width across nut	—
Amount	4 pcs
Packaging	Blister card
GTIN (EAN-Code)	4048962568844

Drill diameter ( d₀ )	10 mm
Anchor length ( l )	90 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Screw dimension ( d_s x l_s )	7.0x87 mm
Min. drill hole depth ( h₁ )	90 mm
Min. effect. anchorage depth ( h_ef )	70 mm
Max. fixture thickness ( t _fix )	10 mm
Drive	TX40
Width across nut	—
Amount	10 pcs
Packaging	Folding box
GTIN (EAN-Code)	4048962568370

HybridPower

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos