The reusable fixing system for diamond drills and saws

Fixing set for diamond drills FDBB

Name: Fixing set for diamond drills FDBB
Brand: fischer

The fixing set for diamond drills FDBB is a multi-use system for the anchoring of diamond drills. The anchoring of diamond drills is subject to special requirements: Fast assembly and disassembly as well as high shear load resistance - including if the drill bit stops with a jerk. The FDBB consists of a clamping nut, the multi-use spindle bolt, and the expansion element, which remains in the drill hole following disassembly. The large steel cross-section guarantees the high shear load resistance of the anchoring system. The detachable screw connection between the expansion element and spindle enables the easy disassembly of the spindle bolt. The robust, reusable spindle bolt also ensures a long life span.

Produktne variante

Download of image data

Produktne variante

(0) produktnih variant (s)

Drill diameter

Min. drill hole depth for through fixings

Width across nut

Contents

Amount

Poglej (0) od (1) rezultat (s)

Advantages

The detachable screw connection between the expansion element and spindle enables simple dismantling and ensures that the spindle bolt can be reused.
The robust, reusable spindle bolt guarantees a long life span.
The active principle of the anchor bolt enables an active controlled expansion, thus offering a high level of safety.
The large steel cross-section provides high shear load-bearing capability and, as such, high security for the jerky stoppage of the drill bit.

Functionality

The FDBB is suitable for pre-positioned and push-through installation.
An expansion element must be added to the spindle bolt before installation.
Use a hammer to drive the FDBB through the base plate of the drilling device into the drill hole.
When the nut is tightened, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The expansion element remains in the drill hole when dismantling the spindle bolt. The spindle bolt is once again completed with an expansion element and can be reused.

Mounting Strip 1 Picture

1 / 5

1
2
3
4
5

Mounting Strip 2 Picture

1 / 3

1
2
3

Sistemske komponente

Hammer drill bit Quattric II S / Quattric II
(0) variante

Drill diameter ( d₀ )	16 mm
Drill diameter	—
Min. drill hole depth for through fixings ( h₂ )	85 mm
Width across nut	27 mm
Contents	1 expansion element 16 SE, 1 spindle bolt 16/50/160, 1 washer, 1 nut
Amount	1 pcs.
GTIN (EAN-Code)	4006209906804

Drill diameter ( d₀ )	16 mm
Drill diameter	—
Min. drill hole depth for through fixings	—
Width across nut	—
Contents	Expansion element
Amount	25 pcs.
GTIN (EAN-Code)	4006209906811

Fixing set for diamond drills FDBB

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos