Art.-No. 95421

fischer bolt anchor FAZ II 12/30 electro zinc plated

Top Features

The world's first bolt anchor with 6 mm drill hole diameter and ETA Option 1 for concrete.
The tried-and-tested expansion clip ensures the maximum load-bearing capacity, even with size M6.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).

The anchor bolt to meet the highest requirements in concrete. Powerful and flexible.

Advantages

The world's first bolt anchor with 6 mm drill hole diameter and ETA Option 1 for secure and reliable anchoring.
The international approvals guarantee maximum safety and the best performance.
General design certification for anchorage in steel fiber concrete for the fischer bolt anchors FAZ II, FAZ II R and FAZ II HCR (diameter M6 - M24).
Fewer hammer blows and minimum torque slippage ensure a noticeably simple and comfortable setting process.

The fischer anchor bolt FAZ II is recommended for fixing heavy objects in concrete. The proven expansion clip corresponds to the strictest requirements expected of the steel anchor. When tightening, the expansion clip pulls the nut towards the drill hole wall and ensures that it is safely fixed. The steel anchor can be easily mounted. Drive in using the hammer, then tighten with a torque wrench - job done. The bolt anchor made of zinc-plated steel can be used in a particularly flexible manner, as a wide range of objects in internal areas can be fixed, such as TV consoles, bannisters, or cable trays.

Applications

Steel constructions
Guard rails
Consoles
Ladders
Cable trays
Machines
Staircases
Gates
Façades
Timber constructions

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked and non-cracked
Steel fiber concrete

Also suitable for:

Concrete C12/15
Concrete C80/95 (classification available)
Natural stone with dense structure

Podroben opis najdete v priloženem dokumentu

Dovoljenja

ETA-05/0069
DoP No. 0186
Z-21.1-2145
3023222

Functionality

The FAZ II is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
When applying the torque, the cone bolt is pulled into the expansion sleeve and expand it against the drill hole wall.
The anchor is set in line with the approval once the preset installation torque is achieved.
In the case of series installation, we recommend using the FABS anchor bolt setting tool.

Mounting Strip 1 Picture

1 / 5

Mounting Strip 2 Picture

1 / 6

ETA Certification Document

pdf, ETA-05/0069

European Technical Assessment for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR - Mechanical fastener for use in concrete

Ustvarjeno na 24. 04. 2020

DOP - Declaration of Performance

pdf, DoP No. 0186

Declaration of Performance for for fischer Bolt Anchor FAZ II, FAZ II R, FAZ II HCR (Mechanical anchor for use in concrete)

Ustvarjeno na 15. 05. 2020

DIBt, National German Certification

pdf, Z-21.1-2145

General construction technique permit - fischer bolt anchor FAZ II, FAZ II R, FAZ II HCR for anchoring in steel fibre reinforced concrete

Velja od 12. 07. 2022
do 12. 07. 2027

Factory Mutual

pdf, 3023222

FM Approval - Certificate of Compliance

Load Table

pdf,

Bolt anchor FAZ II - Permissible loads of a single anchor in normal concrete of strength class C20/25

ETA-approval
ICC-approval
Seismic-Approval	C1 / C2
Drill diameter ( d₀ )	12 mm
Min. drill hole depth for through fixings ( h₂ )	120 mm
Anchor length ( l )	130 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / 50 mm
Thread ( ø x length )	M12 x 81 mm
Width across nut	19 mm
Packaging	Folding box
Amount	20 pcs.
GTIN (EAN-Code)	4006209954218

fischer bolt anchor FAZ II 12/30 electro zinc plated

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Tehnični podatki

Dokumenti za prenos