The cost-efficient fixing for flexible use in non-cracked concrete

Bolt anchor FBN II

Name: Bolt anchor FBN II
Brand: fischer

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

Produktne variante

Download of image data

Produktne variante

Dovoljenja / teh.poročilo

(0) produktnih variant (s)

Drill diameter

Min. drill hole depth for through fixings

Anchor length

Max. usable length hef,stand./hef,min.

Thread

Width across nut

Legenda = Dovoljenje do— = Ni dovoljeno

Več rezultatov

Poglej (0) od (1) rezultat (s)

Advantages

The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Functionality

The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
The head embossing offers a simple control of the anchoring.
In the case of series installation, we recommend using the FABS bolt anchor setting tool.

Mounting Strip 1 Picture

1 / 5

ETA Certification Document

pdf, ETA-07/0211

European Technical Assessment for fischer Bolt Anchor FBN II, FBN II R - Mechanical fastener for use in concrete

Ustvarjeno na 13. 07. 2020

DOP - Declaration of Performance

pdf, DoP No. 0192

Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)

Ustvarjeno na 27. 07. 2020

ETA Certification Document

pdf, ETA-18/0101

European Technical Assessment for fischer Bolt Anchor FBN II HDG Torque controlled expansion anchor - Mechanical fasteners of sizes M8, M10, M12, M16 and M20 for use in uncracked concrete

Ustvarjeno na 16. 07. 2018

DOP - Declaration of Performance

pdf, DoP No. 0268

Declaration of Performance for fischer Bolt Anchor FBN II, FBN II R (Mechanical anchor for use in concrete)

Ustvarjeno na 20. 01. 2021

DOP - Declaration of Performance

pdf, DoP No. 0098

Declaration of Performance for fischer Bolt Anchor FBN II HDG (Metal anchors for use in concrete with variable working life (heavy-duty type))

Ustvarjeno na 23. 07. 2018

Load Table

pdf,

Bolt anchor FBN II - Permissible loads of a single anchor in normal concrete of strength class C20/25.

Marketing Documents

pdf,

Bolt anchor FBN II. The cost-efficient fixing for flexible use in non-cracked concrete.

Technical Data Sheet

pdf,

FBN II Durability

Technical Data Sheet

pdf,

fischer bolt anchor FBN II HDG

Sistemske komponente

Podobni produkti

Bolt anchor FBN II GS with large washer
(0) variante

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Anchor length ( l )	50 mm
Max. usable length hef,stand./hef,min. ( t_fix )	5 / - mm
Thread ( ø x length )	M6 x 12 mm
Width across nut	10 mm
Contents	—
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070231

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	50 mm
Anchor length ( l )	55 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / - mm
Thread ( ø x length )	M6 x 17 mm
Width across nut	10 mm
Contents	—
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070248

ETA-approval
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Anchor length ( l )	75 mm
Max. usable length hef,stand./hef,min. ( t_fix )	30 / - mm
Thread ( ø x length )	M6 x 35 mm
Width across nut	10 mm
Contents	—
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4048962070255

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	61 mm
Anchor length ( l )	65 mm
Max. usable length hef,stand./hef,min. ( t_fix )	5 / 15 mm
Thread ( ø x length )	M8 x 34 mm
Width across nut	13 mm
Contents	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209406625

ETA-approval
Drill diameter ( d₀ )	8 mm
Min. drill hole depth for through fixings ( h₂ )	66 mm
Anchor length ( l )	70 mm
Max. usable length hef,stand./hef,min. ( t_fix )	10 / 20 mm
Thread ( ø x length )	M8 x 39 mm
Width across nut	13 mm
Contents	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209406649

Bolt anchor FBN II

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos