Art.-No. 48407

fischer hammerset anchor EA II M12 D electro zinc plated

Top Features

Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
Use of standard metric screws and threaded rods lowers complexity.
ETA approval for non-cracked concrete.

The internally threaded anchor with approval for installing diamond drills and saws.

Advantages

The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded.
The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

The fischer Hammerset anchor EA II D is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EAW H Plus the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer zinc-plated Hammerset anchor EA II D is ideal for installing diamond drills and saws.

Applications

Pipelines and ventilation ducts
Sprinkler systems
Cable conduits and wires
Gratings
Steel constructions
Machines
Consoles
Shuttering props
Diamond and core drilling devices

Building materials

Approved for:

Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
Concrete C20/25 to C50/60, non-cracked

Also suitable for:

Concrete C12/15
Natural stone with dense structure

Podroben opis najdete v priloženem dokumentu

Dovoljenja

ETA-07/0135
ETA-07/0142
DoP No. 0292
DoP No. 0756-CPD-0332

Functionality

The EA II is suitable for pre-positioned installation.
Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
The setting tools must sit on the rim of the anchor to ensure correct expansion.
Use the special EA II M12 x 50 D / EA M 12 x 50 N D with thicker sleeve for fixing diamond and core drilling devices.

Mounting Strip 1 Picture

1 / 7

ETA Certification Document

pdf, ETA-07/0135

European Technical Assessment for fischer drop-in anchor EA II - Mechanical fasteners for use in concrete

Ustvarjeno na 20. 10. 2021

ETA Certification Document

pdf, ETA-07/0142

European Technical Assessment for fischer drop-in anchor EA II - Fasterners for use in concrete for redundant non-structural systems

Ustvarjeno na 24. 09. 2021

DOP - Declaration of Performance

pdf, DoP No. 0292

Declaration of Performance for fischer Drop-in anchor EA II (Mechanical fastener for use in concrete)

Ustvarjeno na 30. 09. 2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0332

Declaration of Performance for fischer Drop-in anchor EA II

Velja od 11. 06. 2013
do 12. 06. 2028

Dovoljenja

ETA-approval
Drill diameter ( d₀ )	16 mm
Min. bolt penetration ( l_E,min )	12 mm
Max. bolt penetration ( l_E,max )	22 mm
Packaging	Folding box
Amount	25 pcs.
GTIN (EAN-Code)	4006209484074

fischer hammerset anchor EA II M12 D electro zinc plated

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Tehnični podatki

Dokumenti za prenos