The installation-friendly hammerset anchor for multiple fixings

Nail anchor FNA II

Name: Nail anchor FNA II
Brand: fischer

The fischer nail anchor FNA II with a nail head is made from zinc-plated steel, stainless steel, and highly corrosion-resistant steel. The FNA II is primarily suitable for the anchoring of fire protection boards, ventilation systems, metal rails, and subframe systems. The European Technical Approval and classification as per fire resistance class R 120 ensure added safety. The FNA is mounted in a few hammer blows or with a hammer drill in a time-saving push-through installation. The FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole.

Produktne variante

Download of image data

Produktne variante

Dovoljenja / teh.poročilo

(0) produktnih variant (s)

Anchor length

Drill diameter

Min. drill hole depth for through fixings

Max. fixture thickness

Head-ø

Packaging

Legenda = Dovoljenje do— = Ni dovoljeno

Več rezultatov

Poglej (0) od (1) rezultat (s)

Advantages

The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.

Applications

Fire protection plates
Fire protection boards
Ventilation systems
Wire and nonious hangers
Mounting rails
Metal clamps
Substructures made of wood and metal

Building materials

Approved for:

Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications

Also suitable for:

Solid sand-lime brick
Natural stone with dense structure
Prestressed hollow-core concrete slabs

Podroben opis najdete v priloženem dokumentu

Dovoljenja

ETA-06/0175
DoP No. 0235
GS 6.1/21-076-1

Functionality

The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and H
are suitable for pre-positioned installation.
The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-06/0175

European Technical Assessment for fischer Nail anchor FNA II - Load controlled expansion anchor for multiple use for non-structural applications in concrete

Ustvarjeno na 02. 03. 2021

DOP - Declaration of Performance

pdf, DoP No. 0235

Declaration of Performance for fischer Nail anchor FNA II (Mechanical fastener for use in concrete)

Ustvarjeno na 16. 03. 2021

Test report (fire protection)

pdf, GS 6.1/21-076-1

Assessment of the load-bearing behaviour of ﬁscher nail anchors FNA II R and FNA II HCR under tension load and one-sided ﬁre loading according to the ZTV-ING-curve

Ustvarjeno na 05. 10. 2021

Load Table

pdf,

Nail anchor FNA II - Permissible loads for a single anchor for multiple use of redundant non-structural applications in normal concrete C20/25 up to C50/60.

Sistemske komponente

Podobni produkti

ETA-approval
Anchor length ( l )	37,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	40 mm
Max. fixture thickness ( t _fix )	5 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441213

ETA-approval
Anchor length ( l )	42,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	45 mm
Max. fixture thickness ( t _fix )	5 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	100 pcs.
GTIN (EAN-Code)	4006209441152

ETA-approval
Anchor length ( l )	52,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	55 mm
Max. fixture thickness ( t _fix )	15 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962202977

ETA-approval
Anchor length ( l )	67,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	70 mm
Max. fixture thickness ( t _fix )	30 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441169

ETA-approval
Anchor length ( l )	87,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	90 mm
Max. fixture thickness ( t _fix )	50 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441176

Nail anchor FNA II

Produktne variante

Opis izdelka

Dovoljenje aplikaciji

Navodila uporabe

Dokumenti za prenos

ETA-approval
Anchor length ( l )	112,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	115 mm
Max. fixture thickness ( t _fix )	75 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441183

ETA-approval
Anchor length ( l )	137,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	140 mm
Max. fixture thickness ( t _fix )	100 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441190

ETA-approval
Anchor length ( l )	157,5 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	160 mm
Max. fixture thickness ( t _fix )	120 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4006209441206

ETA-approval
Anchor length ( l )	125 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	130 mm
Max. fixture thickness ( t _fix )	90 mm
Head-ø	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962142143

ETA-approval
Anchor length ( l )	135 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	140 mm
Max. fixture thickness ( t _fix )	100 mm
Head-ø ( d_h )	13 mm
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962142150

ETA-approval
Anchor length ( l )	155 mm
Drill diameter ( d₀ )	6 mm
Min. drill hole depth for through fixings ( h₂ )	160 mm
Max. fixture thickness ( t _fix )	120 mm
Head-ø	—
Packaging	Folding box
Amount	50 pcs.
GTIN (EAN-Code)	4048962142167