Solar systems

33 mm high aluminium rail for PV panels mounting systems.

44 mm high aluminium rail for PV panels mounting systems.

83 mm high aluminium rail for PV panels mounting systems.

Bracket for 90° connection of two overlapping Solar rails.

Rail for photovoltaic systems on trapezoidal metal sheet roofs. Suitable for panels with landscape orientation.

Rail for photovoltaic systems on trapezoidal metal sheet roofs. Suitable for panels running along the long side parallel to the trapezoidal rails.

The reduced cross-section of the SolarLight profile is designed for lower loads and offers an economical solution for the installation of photovoltaic systems.

Stainless steel hook with fixed height and large base for the installation of PV panels on pitched tile roofs with ventilation layer.

Stainless steel hook for the installation of PV panels on standing seam sheets. Suitable for flat seaming.

Stainless steel hook for the installation of PV panels on standing seam sheets. Suitable for rounded seaming (e.g. Kalzip).

Aluminium hook with fixed base for the installation of PV panels on pitched tile roofs without ventilation layer.

Aluminium hooks with thin base for the installation of PV panels on pitched tile roofs with ventilation layer of variable thickness.

Aluminium hooks with large base for the installation of PV panels on pitched tile roofs with ventilation layer of variable thickness. Horizontally-offsettable fastening point.

Pre-assembled triangular frame for the installation of PV panels in a lowered position on flat roofs. Suitable for landscape layout installation.

Pre-assembled triangular frame for the installation of PV panels on flat roofs. Suitable for portrait or landscape layout installation.

Universal adjustable clamps for PV panels with aluminium frame from 30 to 50 mm thickness.

Pre-assembled central and end clamps for PV panels with aluminium frame.

Non-assembled central and end aluminium clamps for PV panels with aluminium frame.

Double-threaded screw for fastening photovoltaic systems on roofs with a steel load-bearing structure covered by corrugated panels, faux panels or tiles.

Double-threaded screw for fastening photovoltaic systems on roofs with wooden, concrete or hollow bricks and concrete load-bearing structure, covered by corrugated panels, faux panels or tiles.

Angle bracket for the connection between Solar rails and double-threaded screws.

Flat bracket for the connection between Solar rails and double-threaded screws.

Flat bracket with pre-assembled quick joint for the connection between Solar rails and double-threaded screws.

Flanged hexagon nut in A2 stainless steel with flange.

Self-drilling screws in A2 stainless steel.

Self-drilling screws in A2 stainless steel with EPDM gasket.

Blind rivet with EPDM sealant.

Hammer head screw in A2 stainless steel for Solar rails.

Allen screw in A2 stainless steel.

Aluminium and PA nylon hammer-head nut.

Butyl adhesive tape for joints between Solar rails.

Solar cable tie clip

For quick and easy fixing of PV panels on vertical façades.